9. Settings reference
Open menu → "Settings". Every change applies immediately — there is no
save button — and settings follow your identity: they synchronize across the
devices you are signed in on.
9.1 Language
The first section of the page: a "Language" selector listing English,
Français, Deutsch, Español, Polski, Dansk. The change applies immediately to
the whole interface, and the spoken commands and scores
(§6.3) follow the selected language (provided the
device has a matching text-to-speech voice installed).
9.2 Sound
| Setting |
Default |
Effect |
| "Play scores" |
Off |
Announces each shot's score as it lands (§6.3) |
| "Play commands" |
Off |
Speaks the range commands "Load", "Attention", "Stop" at the phase changes |
| "Play beeps" |
Off |
High beep at the start of every shooting phase, low beep at attention/stop |
The spoken commands use the device's text-to-speech voice; sounds play on the
device showing the series.
9.3 Interface
| Setting |
Default |
Effect |
| "Auto zoom" |
On |
Reframes the target view on the shot group after each hit (§6.4) |
| "Auto next" |
Off |
In a match, starts the next series 3 seconds after one closes (§6.6) |
9.4 LED
| Setting |
Default |
Effect |
| "LED intensity" |
50 (range 5 – 255) |
Brightness of the target's light during a series — raise it outdoors, lower it in a dim indoor range |
| "Show LED for:" "Preparation phase" |
Off |
Light the target red during the "Load" phase |
| "Show LED for:" "Waiting phase" |
On |
Red light during "Attention" and the closing "Stop" phase |
| "Show LED for:" "Shooting phase" |
On |
Green light during the shooting phases |
Turning a phase's switch off leaves the target dark during that phase — some
shooters prefer no light except the green fire signal. The colors themselves are
fixed (red = don't fire, green = fire); see the LED table in
§2.4.
9.5 Session
| Setting |
Default |
Effect |
| "Preparation time" |
20 s (range 5 – 30 s) |
The time left in the preparation phase after you tap the countdown to skip it (§6.5) |
9.6 Indicators
| Setting |
Default |
Effect |
| "Mean radius" |
On |
Draws the mean-radius circle over the shot group (§7.6) |
| "Maximal spread" |
On |
Draws the maximal-spread frame over the group |
9.7 Others
| Control |
Effect |
| "Revoke" (signed-in only) |
Withdraws your shooter from every account you shared it with via a share code (§8.2); asks for confirmation, then reads "Access revoked" |
| "Update (legacy)" |
Pushes the compatibility firmware update to a first-generation WiFi target that has never been used with the current app generation — connect the phone to the target's WiFi network first (§3.7) |
9.8 Settings that live elsewhere
- Username — User page (§4.2).
- "Show my code" (shooter sharing) — User page
(§8.2).
- Per-target auto-shutdown — the target's own page; stored in the target
(§2.6).
- Exclusive mode — User page, supervisor accounts only
(§8.5).
- Session temperature (Auto/Manual) — set per session on the New-session page
(§5.3).